The loading of bulk material is very fast because of the big shovel volume. The draft of the bucket side walls ensure a discharging even in cohesive soil. The rear grid gives the driver a clear view to the blade.

It is a MUST for each wheel loader operation.

Utilisation

A wonderful planum is achieved in the following way:

1. pull off unevenness with the rear blade
2. push off remaining unevenness with the rear blade
3. lift slightely the front axle with the front blade and compress the soil while driving backwards

Just a higher grade in perfection pulling a planum, guarantees the hydraulic-valve with float position.

The levelling shovel is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 249 mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 335€ incl. vat. plus shipment. Order until 30.09.2024 latest.

Is sold out, but If I get enough order, this Hitch attachment will be produced for you the last time. Delivery time November 2024.

The Light Goods Bucket XL is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 249mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 360€ incl. vat. plus shipment. Delivery time: 1-2 weeks

The XHD Rock Bucket XL is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

The loading of bulk material is very fast because of the big shovel volume. The draft of the bucket side walls ensure a discharging even in cohesive soil. The rear grid gives the driver a clear view to the blade.

It is a MUST for each wheel loader operation.

Utilisation

A wonderful planum is achieved in the following way:

1. pull off unevenness with the rear blade
2. push off remaining unevenness with the rear blade
3. lift slightely the front axle with the front blade and compress the soil while driving backwards

Just a higher grade in perfection pulling a planum, guarantees the hydraulic-valve with float position.

The Levelling Bucket L is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225 mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 315€ incl. vat. plus shipment. Order until 30.09.2024 latest.

Is sold out, but If I get enough order, this Hitch attachment will be produced for you the last time. Delivery time November 2024.

The loading shovel is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225 mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

The Light Goods Bucket L is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

The spezial teeth on the side are part of a very robust edge system. At the S-formed sidewalls are sidebar shrouds assembled for hard wearing. The rear wall and the rear wall grid are increased in the middle to protect the lifting gear.

The XHD Rock Bucket L is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 350€ incl. vat. plus shipment. Order until 30.09.2024 latest.

Is sold out, but If I get enough order, this Hitch attachment will be produced for you the last time. Delivery time November 2024.

To protect the tyres a bumper is attached to the side. The assembly of this bumper is optional for the modell. So the Heavy Duty Rock Bucket M also suits perfectly to smaller loader.

Width 205mm (inclusive optional bumper 225mm).

The HD Rock Bucket M is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

To protect the tyres a bumper is attached to both side. The assembly of these bumper are optional and are available in two width. So the eXtreme Heavy Duty Rock Bucket S suits also perfectly to smaller loader, like The carson or CTI-Bruder track loader or the CTI Bruder wheel loader. To reduce the weight to a minimum, a robust sandwich aluminium-stainless steel construction is used.

Width 190mm (inclusive optional bumper 225mm or 209mm)

The XHD Rock Bucket S is equipped for the BRAEKER-LOCK.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel and aluminium is the 2K Epoxy Primer Filler.

Price

sold out

The screen bucket is equipped for the BRAEKER-LOCK. It is completely made out of lasercutted stainless steel sheets.

Width 222mm.

Screen 7.5mm

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

Out of order.

The fork arm can be adjusted to the freight in width by hand.

Width 40 mm to 176 mm. Fork rake 140 mm. Load max. 6kg

The fork is completely made out of lasercutted stainless steel sheets.It is equipped for the BRAEKER-LOCK.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

Fork rake length: 110mm
Total width of fork: 121mm

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel or aluminium is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 299€ incl. vat. plus shipment. Delivery time: 1-2 weeks

The extremely short design of the HD Dozer Blade reduces the distance to the front axle to a minimum. Therefore a maximum traction is guaranteed. And the influence of ground irregularities due to the tires is also at a low level.

Just a higher grade in perfection pulling a planum, guarantees the hydraulic-valve with float position.

The HD Dozer Blade is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 225mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

To use the active tilting function, you have to assemble the electric lift cylinder EHZ 13/10 and the electronic control unit Thor 2/678 of CTI-Modellbau or a Leimbach hydraulic-cylinder D12x10mm. You do not need to use the active tilting. The passive tilting (no cylinder) works perfectly.

Price

The assembly kid costs 375€ incl. vat. plus shipment. Order until 30.09.2024 latest.

Is sold out, but If I get enough order, this Hitch attachment will be produced for you the last time. Delivery time November 2024.

The wings of the blade provide improved load retention and yield higher capacities over traditional straight and Semi-U dozer blades. Braeker HD Abrasion U-Dozer Blades feature rock guards, wear liners, side shrouds and vertical slat rock guards. With 30 degree wing angles, these blades allow for improved capacities and material retention during the push.

Just a higher grade in perfection pulling a planum, guarantees the hydraulic-valve with float position.

The HD Dozer Blade is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 261mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

The Ground Leveller is made for operation at hardened driveways and compacted soils. It works in both directions of travel.

Angled cutting blades scrape off raised ground areas. The scraped off material flows into the following compartments of the Ground Leveller. From there it is pressed into the hollow ground areas, where is a lack of material. This creates a flat surface in just one work step.

If stones stuck in the ground, the driver can easily lever them out with the toothed front blade of the Ground Leveller. Even hard ground is torn open with the toothed blade.

Just a higher grade in perfection levelling a planum, guarantees the hydraulic-valve with float position.

The Ground Leveller is completely made out of lasercutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 250mm.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel is the 2K Epoxy Primer Filler.

Price

sold out

Very interesting is the use of the Front Ripper for track loader and track dozer (caterpillar).

Caterpillar usually use a rear ripper. But a rear ripper reduces the angle of driving slope and therefore the climbing ability. The Front Ripper eliminates this disadvantage.

Just a higher grade in perfection in ripping, guarantees the hydraulic-valve with float position.

The Front Ripper is made out of precision laser cutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel and aluminium is the 2K Epoxy Primer Filler.

Price

Sold out.

The Adapter-Plate is made out of precision laser cutted stainless steel sheets. It is equipped for the BRAEKER-LOCK.

Width 131mm, Hight 70mm

For the assembly kid are the special glue for metal, Dispensing nozzles and the degreaser necessary. Recommendable for a good adhesion of the layquer on stainless steel or aluminium is the 2K Epoxy Primer Filler.

Price

The assembly kid costs 125€ incl. vat. plus shipment. Delivery time: 1-2 weeks