This micro hydraulic pump comes with a lot features:
The best way to mount the micro hydraulic pump are 3 Vibration Damper.
The commercially available model-hydraulic valves have advantages, but also disadvantages. The disadvantages have prompted me to develop a completely new design concept, which combines the advantages of the different conventional designs in itself. In conjunction with highest quality material a valve of superlatives is ensured:
The micro 4-port/3-way proportional-valve
1-fold valve: | Data sheet | 3D model |
2-fold valve: | Data sheet | 3D model |
3-fold valve: | Data sheet | 3D model |
4-fold valve: | Data sheet | 3D model |
5-fold valve: | Data sheet | 3D model |
6-fold valve: | Data sheet | 3D model |
The valve modules will be delivered completely with:
Only the nipples/plugs must be ordered additionally:
Sold out
A floating position is necassary for pulling an accurate formation level with bulldozers, groomers, tractor or wheel loader. Fixed blades intensify floor uneveness, because of the leverage between blade and chassis. Small ground waves are getting bigger.
The valve module with float position lets the Dozer Blade, die Levelling Bucket, den Front Ripper ot the AlpinFlexMill with Finisher slide freely over the formation level, independent from movements of the vehicule. Only in this way an accurate formation level is made fast.
The valve module with float position has a width of 24mm and fits into the Braeker Micro-Hydraulic-Valve. It can also be upgraded later. In the module is allready the 4-port/3-way proportional valve intergarted and internally with the 5-port/2-way float valve connected. Also the valve module with float position has 4ports M5. Up to 2 hydraulic cylinders can be connectied directly. No Y-connector is necessary
Data sheet 3D model
The valve module will be delivered completely with:
Only the nipples/plugs must be ordered additionally:
Sold out